2021 Cost of Electrical Work
Redoing an electrical installation for the renovation of a room or the whole house always comes at a very high price. But it isn’t easy to give the total cost. This is why we have decided to give you the budget according to the different works and the other steps. This way, you will only have to add up the prices you are interested in.
However, you should know a very simple calculation to calculate the full electrical installation cost. It is this calculation: surface area in m² of your home x 90 to 150 $ per hour. For an apartment of 100 m² for example, the renovation will cost 150 x 90 $ or 100 x 100 $, i.e. 9,000 $ and 10,000 $. For the rest, we detail the costs and supplies so that you can plan your electrical renovation budget as closely as possible.
Why renovate your electrical installations?
The first reason that justifies an electrical renovation is to comply with the standards in force and the NFC 15-100 standard. To comply with Canadian numbers, your installation must include;
- A modular table bringing together all the devices
- A circuit breaker
- Plugs equipped with grounding pins
- General differential protection
- High sensitivity differential devices
Be aware that electrical installations dating from before 1991 are considered obsolete and are not designed to meet today’s demands. An obsolete installation can have serious consequences, particularly the risk of overheating or short-circuiting, which can lead to a fire. If this is why you are renovating your electrical system, you are making the right choice.
A partial or complete renovation?
Partial renovation is chosen when only part of the network is obsolete. It includes replacing the electrical panel and adjusting modifications according to the state of conformity of your home. It is possible to carry out the electrical renovation piece by piece to connect to the new lines planned.
Our advice:
Be careful; simply replacing your obsolete outlets is not considered a partial renovation. Keeping old lines with new plugs is strictly useless. For a complete renovation, complete removal of the existing installation must be considered to replace it with a device corresponding to the current needs. This usually includes:
- The replacement of cables
- The respect of the number of devices per power line
- The replacement of the electrical panel but also of its components
- Bringing the network into compliance
- The grounding of the circuit
For your home’s electrical renovation, know that you can make a recessed or exposed electrical renovation.
Recessed retrofitting will require a larger budget
As you can see, it isn’t easy to estimate the average budget for an electrical renovation. It all depends on the scope of the contractor. If you are thinking of going through a professional, we advise you to use the form below. It allows you to generate several estimates from professionals in your area, free of charge and without obligation. Take the time to try; it will give you a good idea of the price you will pay for your work:
The price of an electrical panel
- The cost of electricity during a renovation
- The electrical panel contains the various modules of your system.
- It gives you access to your entire installation at a glance.
- A bare electrical panel costs between 50 and 150 $.
- For a pre-equipped electrical panel, it will cost you between 150 and 500 $.
The price of an electric meter
It is mandatory to measure your electricity consumption and is either electronic or graduated. An electric meter costs about 300 $ and about 250 $ for a graduated model.
The price of a circuit breaker
The circuit breaker is essential to protect your electrical installation from overheating. It allows you to cut off certain sectors or the entire installation. You will need a general, divisional or differential circuit breaker. For all three, expect a cost of 60 to 350 $.
The price of a differential switch
Its price depends on its amperage. The higher the amperage, the more expensive the switch will be. Plan a budget of 50 to 150 $.
Other electrical equipment prices
- A fuse: they sell for around 19 $ a box often. It’s not expensive but doesn’t forget that you’ll need a lot of them.
- A load shedder: it is not obligatory, and fortunately it costs around 400 $. However, it is advisable to control your daily electricity consumption and therefore reduce your bill.
- Dimmer costs between 19 and 150 $.
- A timer costs between 39 and 80 $.
- A contactor is worth between 50 and 90 $
- The switches cost between 2 and 90 $.
Our advice
Renovating electricity requires a certain amount of know-how. You don’t go into electrical work if you don’t know a little about it. The safety of your home is at stake, but also the safety of the people who live under your roof. Redoing the entire electrical system has nothing to do with changing plugs or switches. Let the professional do what they do best: their job.
We advise you to get at least 2 quotes from 2 different professionals. This allows you to check the seriousness and honesty of the professional you wish to hire for your work. To reduce this rate or keep it low, we advise you to hire an electrician who works near you. Electricians often take small margins when buying the material needed for the renovation.
To reduce your bill, nothing prevents you from buying this equipment yourself. But you’ll have to tell the electrician when you get the estimate.
How Much Do Home Renovations Really Cost?
Electricity renovation is expensive, but it is a facility that should not be neglected to reduce costs. A faulty installation can lead to the risk of electrocution or, worse, fire. Then indeed, the price of a worker is high but is justified mainly because it does not put your family in danger for the sake of savings in Montreal, Laval, North Shore, Longueuil, North Shore, Saint-Laurent, Greenfield Park, West Island, Dorval, Mont Royal, Blainville, Brossard, Boucherville, Terrebonne, Pointe-aux-Trembles, Rivière des Prairies, Plateau Mont-Royal, Outremont, Westmount, Vieux-Montréal, Saint-Eustache, Boisbriand, Île-des-Sœurs, Repentigny, Greenfield Park, Saint-Hubert, LeMoyne, Saint-Bruno-de-Montarville, Saint-Lambert, Beloeil, Chambly, Saint-Jean-Baptiste, Gatineau, Ottawa, Outaouai, Saint Sauveur, Sainte-Thérèse, Candiac, Saint-Bruno-de-Montarville, Hampstead, Verdun, Ville-Marie, Sud-Ouest, Rosemont-la-Petite-Patrie, Mercier, Hochelaga-Maisonneuve, Villeray, Saint-Michel, Parc extension, Ahuntsic, Cartierville, Ville St-Laurent, Anjou, Montréal-Nord, St-Léonard, Vimont, Auteuil, Saint-François, Duvernay, Sainte-Dorothée, Fabreville, Chomedey, Laval-des-Rapides, Renaud, Saint-Vincent de Paul, Pont Viau, Laval-sur-le-lac, Sainte-Rose, Beaconsfield, Île Perrot, Senneville, Ste-Anne-de-Bellevue, Kirkland, l’Île Bizard, Sainte-Genevieve, Pierrefonds-Roxboro, Baie d’urfé, Montréal-Est, Dollard-Des-Ormeaux, Dorval, Pointe-Claire, Lachine, Ville Lasalle, Centre-ville, Côte St-Luc, Montréal-Ouest, Côte-des-Neiges, Notre-Dame-de Grace, Vancouver, Granby, Quebec, Gatineau, Sainte-Foy – Sillery, Trois-Rivières, Beauport, Haute Saint-Charles, Shawinigan, St-Nicolas, Lévis or surrounding areas..
The best way to know your budget: ask for quotes
We always try to help you as much as possible in estimating your budget. But it is important to remember that each job is unique: the only way to know precisely your budget is to ask for an estimate.
This is why we suggest that you use our quote generator. It’s completely free and without obligation. It only takes 3 minutes, and you get three quotes from local professionals. In short, it’s perfect to know precisely the cost of your work. So why not give it a try?
